Custom made high arch soles are usually made for the the people who have severe cases of low foot arches or complete flat feet. Of course the custom made ones are made from the manufacturers have the specific measurements and such that the flat footed patient will need but what many do not know is that it is possible to create handmade orthotics. The only catch here is that only athletes or people with a mild case of low arch may be able to use it just to be safe.
Now if one would want to make a homemade arch support insole, then he would have to buy a few things. Firstly, he will be needing two to three old insoles that would probably come from an old pair of shoes. He has to make sure that the insoles all have the same size.
The next thing that he would have to get would be a glue that is waterproof or better yet, super glue that can really stick. In order to cut up the insoles, one will be needing a pair of really sharp scissors because insoles may be tough to cut. As long as one has these things, then he may start getting to work on that insole.
Now the first thing to do would be to get the existing insoles and measure them. As stated earlier, all of the insoles have to be of the same size so that there will be consistency. After that, put one insole on top of another and determine which part is the part that would hold the arch.
When it is has been found, cut that part out from only one of the soles. In other words, cut out that part of one sole and make sure that the other sole is whole. From there, glue the one that was cut to the one that is whole using the super glue or the waterproof glue.
After that has already been done, then one just has to wait for the glue to dry before he tries it out. Of course as stated above, the best glue for this type of project would be super glue. It is this glue that is the stickiest as well as the most effective and it dries really fast.
In the event that the arch support is still not high enough for the person making it, then he may actually put another insole if he would want. He just has to get the third insole and just do the entire process again. Once he has done that, then he just has to wait for the glue dry and then try it on again.
So as one can see, it is actually very easy to make handmade orthotics at home. However, if one has a really bad condition of flat feet, then it is better that he would just buy a custom made one. However, if he just has a low arch or is an athlete that needs one that will help him in his sports, then a handmade one will already suffice.
Now if one would want to make a homemade arch support insole, then he would have to buy a few things. Firstly, he will be needing two to three old insoles that would probably come from an old pair of shoes. He has to make sure that the insoles all have the same size.
The next thing that he would have to get would be a glue that is waterproof or better yet, super glue that can really stick. In order to cut up the insoles, one will be needing a pair of really sharp scissors because insoles may be tough to cut. As long as one has these things, then he may start getting to work on that insole.
Now the first thing to do would be to get the existing insoles and measure them. As stated earlier, all of the insoles have to be of the same size so that there will be consistency. After that, put one insole on top of another and determine which part is the part that would hold the arch.
When it is has been found, cut that part out from only one of the soles. In other words, cut out that part of one sole and make sure that the other sole is whole. From there, glue the one that was cut to the one that is whole using the super glue or the waterproof glue.
After that has already been done, then one just has to wait for the glue to dry before he tries it out. Of course as stated above, the best glue for this type of project would be super glue. It is this glue that is the stickiest as well as the most effective and it dries really fast.
In the event that the arch support is still not high enough for the person making it, then he may actually put another insole if he would want. He just has to get the third insole and just do the entire process again. Once he has done that, then he just has to wait for the glue dry and then try it on again.
So as one can see, it is actually very easy to make handmade orthotics at home. However, if one has a really bad condition of flat feet, then it is better that he would just buy a custom made one. However, if he just has a low arch or is an athlete that needs one that will help him in his sports, then a handmade one will already suffice.
No comments:
Post a Comment